Com.google.android.gms.unstable

com.google.android.gms.unstable
#!/system/bin/sh

# assuming youu have magisk, put this in /data/adb/service.d/
sleep 22;

# Disable sysctl.conf to prevent ROM interference #1
if [ -e /system/etc/sysctl.conf ]; then
mount -o remount,rw /system;
mv /system/etc/sysctl.conf /system/etc/sysctl.conf.bak;
mount -o remount,ro /system;
fi;
com.google.android.gms.unstable get more info com.google.android.gms.unstable

# Filesystem tweaks for better system performance;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /proc;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /sys;
busybox mount -o remount,nodev,noatime,nodiratime,barrier=0,noauto_da_alloc,discard -t auto /system;

# Disable / stop system logging (logd) daemon;
stop logd

com.google.android.gms.unstable website com.google.android.gms.unstable
# Doze setup services (experimental)
pm disable com.google.android.gms/.update.SystemUpdateActivity
pm disable com.google.android.gms/.update.SystemUpdateService
pm disable com.google.android.gms/.update.SystemUpdateService$ActiveReceiver
pm disable com.google.android.gms/.update.SystemUpdateService$Receiver
pm disable com.google.android.gms/.update.SystemUpdateService$SecretCodeReceiver
pm disable com.google.android.gsf/.update.SystemUpdateActivity
pm disable com.google.android.gsf/.update.SystemUpdatePanoActivity
pm disable com.google.android.gsf/.update.SystemUpdateService
pm disable com.google.android.gsf/.update.SystemUpdateService$Receiver
com.google.android.gms.unstable read more com.google.android.gms.unstable
pm disable com.google.android.gsf/.update.SystemUpdateService$SecretCodeReceiver
pm disable –user 0 com.google.android.gms/.phenotype.service.sync.PhenotypeConfigurator;
settings put secure location_providers_allowed ‘ ‘;
dumpsys deviceidle enable all;
dumpsys deviceidle enabled all;

#GMS Doze Test
# Stop certain services and restart it on boot (experimental)
if [ “$(busybox pidof com.qualcomm.qcrilmsgtunnel.QcrilMsgTunnelService | wc -l)” -eq “1” ]; then
busybox kill $(busybox com.qualcomm.qcrilmsgtunnel.QcrilMsgTunnelService);
com.google.android.gms.unstable read more com.google.android.gms.unstable
fi;
if [ “$(busybox pidof com.google.android.gms.mdm.receivers.MdmDeviceAdminReceiver | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.mdm.receivers.MdmDeviceAdminReceiver);
fi;
if [ “$(busybox pidof com.google.android.gms | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms);
fi;
if [ “$(busybox pidof com.google.android.gms.unstable | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.unstable);
fi;
com.google.android.gms.unstable check here com.google.android.gms.unstable
if [ “$(busybox pidof com.google.android.gms.persistent | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.persistent);
fi;
if [ “$(busybox pidof com.google.android.gms.wearable | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.wearable);
fi;
if [ “$(busybox pidof com.google.android.gms.backup.backupTransportService | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.backup.backupTransportService);
fi;
if [ “$(busybox pidof com.google.android.gms.lockbox.LockboxService | wc -l)” -eq “1” ]; then
com.google.android.gms.unstable get more info com.google.android.gms.unstable
busybox kill $(busybox pidof com.google.android.gms.lockbox.LockboxService);
fi;
if [ “$(busybox pidof com.google.android.gms.auth.setup.devicesignals.LockScreenService | wc -l)” -eq “1” ]; then
busybox kill $(busybox pidof com.google.android.gms.auth.setup.devicesignals.LockScreenService);
fi;

settings put global dropbox_max_files 1;
settings put global hide_carrier_network_settings 0;
settings put system anr_debugging_mechanism 0;
settings put global tether_dun_required 0;
com.google.android.gms.unstable check here com.google.android.gms.unstable

# Doze battery life profile;
settings delete global device_idle_constants;
settings put global device_idle_constants inactive_to=60000,sensing_to=0,locating_to=0,location_accuracy=2000,motion_inactive_to=0,idle_after_inactive_to=0,idle_pending_to=60000,max_idle_pending_to=120000,idle_pending_factor=2.0,idle_to=900000,max_idle_to=21600000,idle_factor=2.0,max_temp_app_whitelist_duration=60000,mms_temp_app_whitelist_duration=30000,sms_temp_app_whitelist_duration=20000,light_after_inactive_to=10000,light_pre_idle_to=60000,light_idle_to=180000,light_idle_factor=2.0,light_max_idle_to=900000,light_idle_maintenance_min_budget=30000,light_idle_maintenance_max_budget=60000;

#Enable msm_thermal and core_control
echo “Y” > /sys/module/msm_thermal/parameters/enabled
echo “1” > /sys/module/msm_thermal/core_control/enabled

com.google.android.gms.unstable check here com.google.android.gms.unstable
# A customized CPUSet profile
echo “3” > /dev/cpuset/background/cpus
echo “1,3” > /dev/cpuset/camera-daemon/cpus
echo “0-1” > /dev/cpuset/foreground/cpus
echo “2” > /dev/cpuset/kernel/cpus
echo “2-3” > /dev/cpuset/restricted/cpus
echo “2-3” > /dev/cpuset/system-background/cpus
echo “0-3” > /dev/cpuset/top-app/cpus

#CPU Governor to schedutil
com.google.android.gms.unstable here com.google.android.gms.unstable
echo “schedutil” > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo “schedutil” > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo “schedutil” > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo “schedutil” > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor

#Add some freq tweaks
echo “777” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/down_rate_limit_us
echo “0” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/iowait_boost_enable
echo “777” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/up_rate_limit_us
#echo “1228800” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/hispeed_freq
com.google.android.gms.unstable here com.google.android.gms.unstable
#echo “1” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/hispeed_load
echo “0” > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/pl

#cpu1
echo “777” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/down_rate_limit_us
echo “0” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/iowait_boost_enable
echo “777” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/up_rate_limit_us
#echo “1228800” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/hispeed_freq
#echo “1” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/hispeed_load
echo “0” > /sys/devices/system/cpu/cpu1/cpufreq/schedutil/pl
com.google.android.gms.unstable read more com.google.android.gms.unstable

#cpu2
echo “777” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/down_rate_limit_us
echo “0” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/iowait_boost_enable
echo “777” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/up_rate_limit_us
#echo “825600” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/hispeed_freq
#echo “1” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/hispeed_load
echo “0” > /sys/devices/system/cpu/cpu2/cpufreq/schedutil/pl

#cpu3
com.google.android.gms.unstable check here com.google.android.gms.unstable
echo “777” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/down_rate_limit_us
echo “0” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/iowait_boost_enable
echo “777” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/up_rate_limit_us
#echo “825600” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/hispeed_freq
#echo “1” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/hispeed_load
echo “0” > /sys/devices/system/cpu/cpu3/cpufreq/schedutil/pl

# Disable exception-trace and reduce some overhead that is caused by a certain amount and percent of kernel logging, in case your kernel of choice have it enabled;
echo “0” > /proc/sys/debug/exception-trace

PASTE  Pewposterous Mega

com.google.android.gms.unstable more info com.google.android.gms.unstable
# FileSystem (FS) optimized tweaks & enhancements for a improved userspace experience;
echo “0” > /proc/sys/fs/dir-notify-enable
echo “20” > /proc/sys/fs/lease-break-time
echo “0” > /proc/sys/kernel/hung_task_timeout_secs

# A couple of minor kernel entropy tweaks & enhancements for a slight UI responsivness boost;
echo “192” > /proc/sys/kernel/random/read_wakeup_threshold
echo “90” > /proc/sys/kernel/random/urandom_min_reseed_secs
echo “1792” > /proc/sys/kernel/random/write_wakeup_threshold
echo “0” > /sys/module/lpm_levels/parameters/sleep_disabled
com.google.android.gms.unstable check here com.google.android.gms.unstable

# Kernel based tweaks that reduces the amount of wasted CPU cycles to maximum and gives back a huge amount of needed performance to both the system and the user;
echo “0” > /proc/sys/kernel/compat-log
echo “0” > /proc/sys/kernel/panic
echo “0” > /proc/sys/kernel/panic_on_oops
echo “0” > /proc/sys/kernel/softlockup_panic
echo “0” > /proc/sys/kernel/perf_cpu_time_max_percent
echo “0” > /proc/sys/kernel/nmi_watchdog
echo “5” > /proc/sys/kernel/sched_walt_init_task_load_pct
echo “0” > /proc/sys/kernel/sched_tunable_scaling
com.google.android.gms.unstable get more info com.google.android.gms.unstable

# Fully disable kernel printk console log spamming directly for less amount of useless wakeups (reduces overhead);
echo “0 0 0 0” > /proc/sys/kernel/printk

# Increase how much CPU bandwidth (CPU time) realtime scheduling processes are given for slightly improved system stability and minimized chance of system freezes & lockups;
echo “955000” > /proc/sys/kernel/sched_rt_runtime_us

# Network tweaks for slightly reduced battery consumption when being “actively” connected to a network connection;
echo “128” > /proc/sys/net/core/netdev_max_backlog
echo “0” > /proc/sys/net/core/netdev_tstamp_prequeue
com.google.android.gms.unstable get more info com.google.android.gms.unstable
echo “24” > /proc/sys/net/ipv4/ipfrag_time
echo “westwood” > /proc/sys/net/ipv4/tcp_congestion_control
echo “1” > /proc/sys/net/ipv4/tcp_ecn
echo “3” > /proc/sys/net/ipv4/tcp_fastopen
echo “1” > /proc/sys/net/ipv4/tcp_sack
echo “1” > /proc/sys/net/ipv4/tcp_fack
echo “0” > /proc/sys/net/ipv4/tcp_delayed_ack
echo “1” > /proc/sys/net/ipv4/tcp_tw_reuse
echo “1” > /proc/sys/net/ipv4/tcp_dsack
echo “0” > /proc/sys/net/ipv4/tcp_fwmark_accept
com.google.android.gms.unstable here com.google.android.gms.unstable
echo “320” > /proc/sys/net/ipv4/tcp_keepalive_intvl
echo “21600” > /proc/sys/net/ipv4/tcp_keepalive_time
echo “1” > /proc/sys/net/ipv4/tcp_no_metrics_save
echo “0” > /proc/sys/net/ipv4/tcp_slow_start_after_idle
echo “48” > /proc/sys/net/ipv6/ip6frag_time

# Virtual Memory tweaks & enhancements for a massively improved balance between performance and battery life;
echo “1” > /proc/sys/vm/drop_caches
echo “11” > /proc/sys/vm/dirty_background_ratio
echo “400” > /proc/sys/vm/dirty_expire_centisecs
com.google.android.gms.unstable here com.google.android.gms.unstable
echo “0” > /proc/sys/vm/page-cluster
echo “20” > /proc/sys/vm/dirty_ratio
echo “0” > /proc/sys/vm/laptop_mode
echo “0” > /proc/sys/vm/block_dump
echo “1” > /proc/sys/vm/compact_memory
echo “3000” > /proc/sys/vm/dirty_writeback_centisecs
echo “0” > /proc/sys/vm/oom_dump_tasks
echo “0” > /proc/sys/vm/oom_kill_allocating_task
echo “1103” > /proc/sys/vm/stat_interval
echo “0” > /proc/sys/vm/panic_on_oom
com.google.android.gms.unstable get more info com.google.android.gms.unstable
echo “30” > /proc/sys/vm/swappiness
echo “94” > /proc/sys/vm/vfs_cache_pressure
echo ’50’ > /proc/sys/vm/overcommit_ratio
echo ‘24300’ > /proc/sys/vm/extra_free_kbytes
echo ’64’ > /proc/sys/kernel/random/read_wakeup_threshold
echo ‘128’ > /proc/sys/kernel/random/write_wakeup_threshold
#echo ‘0’ > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk
echo ‘21816,29088,36360,43632,50904,65448’ > /sys/module/lowmemorykiller/parameters/minfree

if [ -e “/sys/module/lowmemorykiller/parameters/oom_reaper” ]; then
com.google.android.gms.unstable check here com.google.android.gms.unstable
echo “1” > /sys/module/lowmemorykiller/parameters/oom_reaper
fi;

echo “0” > /d/tracing/tracing_on;
echo “0” > /sys/module/rmnet_data/parameters/rmnet_data_log_level;
if [ -e /sys/kernel/debug/kgsl/kgsl-3d0/log_level_cmd ];then
echo “0” > /sys/kernel/debug/kgsl/kgsl-3d0/log_level_cmd;
echo “0” > /sys/kernel/debug/kgsl/kgsl-3d0/log_level_ctxt;
echo “0” > /sys/kernel/debug/kgsl/kgsl-3d0/log_level_drv;
echo “0” > /sys/kernel/debug/kgsl/kgsl-3d0/log_level_mem;
com.google.android.gms.unstable more info com.google.android.gms.unstable
echo “0” > /sys/kernel/debug/kgsl/kgsl-3d0/log_level_pwr;
fi;
# Turn off a few additional kernel debuggers and what not for gaining a slight boost in both performance and battery life;
echo “Y” > /sys/module/bluetooth/parameters/disable_ertm
echo “Y” > /sys/module/bluetooth/parameters/disable_esco
echo “0” > /sys/module/dwc3/parameters/ep_addr_rxdbg_mask
echo “0” > /sys/module/dwc3/parameters/ep_addr_txdbg_mask
echo “0” > /sys/module/dwc3_msm/parameters/disable_host_mode
echo “0” > /sys/module/hid_apple/parameters/fnmode
echo “0” > /sys/module/hid/parameters/ignore_special_drivers
com.google.android.gms.unstable more info com.google.android.gms.unstable
echo “N” > /sys/module/hid_magicmouse/parameters/emulate_3button
echo “N” > /sys/module/hid_magicmouse/parameters/emulate_scroll_wheel
echo “0” > /sys/module/hid_magicmouse/parameters/scroll_speed
echo “Y” > /sys/module/mdss_fb/parameters/backlight_dimmer
#echo “N” > /sys/module/otg_wakelock/parameters/enabled
echo “Y” > /sys/module/workqueue/parameters/power_efficient
echo “N” > /sys/module/sync/parameters/fsync_enabled
#echo “0” > /sys/module/wakelock/parameters/debug_mask
#echo “0” > /sys/module/userwakelock/parameters/debug_mask
echo “0” > /sys/module/binder/parameters/debug_mask
com.google.android.gms.unstable click here com.google.android.gms.unstable
echo “0” > /sys/module/debug/parameters/enable_event_log
echo “0” > /sys/module/glink/parameters/debug_mask
echo “N” > /sys/module/ip6_tunnel/parameters/log_ecn_error
echo “0” /sys/module/subsystem_restart/parameters/enable_ramdumps
echo “0” > /sys/module/lowmemorykiller/parameters/debug_level
echo “0” > /sys/module/msm_show_resume_irq/parameters/debug_mask
echo “0” > /sys/module/msm_smd_pkt/parameters/debug_mask
echo “N” > /sys/module/sit/parameters/log_ecn_error
echo “0” > /sys/module/smp2p/parameters/debug_mask
echo “0” > /sys/module/usb_bam/parameters/enable_event_log
com.google.android.gms.unstable get more info com.google.android.gms.unstable
echo “Y” > /sys/module/printk/parameters/console_suspend
echo “N” > /sys/module/printk/parameters/cpu
echo “Y” > /sys/module/printk/parameters/ignore_loglevel
echo “N” > /sys/module/printk/parameters/pid
echo “N” > /sys/module/printk/parameters/time
echo “0” > /sys/module/service_locator/parameters/enable
echo “1” > /sys/module/subsystem_restart/parameters/disable_restart_work

for i in $(find /sys/ -name debug_mask); do
echo “0” > $i;
com.google.android.gms.unstable check here com.google.android.gms.unstable
done
for i in $(find /sys/ -name debug_level); do
echo “0” > $i;
done
for i in $(find /sys/ -name edac_mc_log_ce); do
echo “0” > $i;
done
for i in $(find /sys/ -name edac_mc_log_ue); do
echo “0” > $i;
done
com.google.android.gms.unstable get more info com.google.android.gms.unstable
for i in $(find /sys/ -name enable_event_log); do
echo “0” > $i;
done
for i in $(find /sys/ -name log_ecn_error); do
echo “0” > $i;
done
for i in $(find /sys/ -name snapshot_crashdumper); do
echo “0” > $i;
done

PASTE  Https//www.nydus.battle.net/wow/enus/launcher/driver Updates

com.google.android.gms.unstable website com.google.android.gms.unstable
# Enable CFQ group idle mode for improved scheduling effectivness by merging the IO queues in a “unified group” instead of treating them as individual IO based queues;
for i in /sys/devices/virtual/block/*/queue/iosched; do
echo “1” > $i/group_idle;
done;

# Disable CFQ low latency mode for overall increased IO based scheduling throughput and for better overall needed responsivness & performance from the system;
for i in /sys/devices/virtual/block/*/queue/iosched; do
echo “0” > $i/low_latency;
done;

com.google.android.gms.unstable here com.google.android.gms.unstable
# Disable gesture based vibration because it is honestly not even worth having enabled at all;
echo “0” > /sys/android_touch/vib_strength

# Wide block based tuning for reduced lag and less possible amount of general IO scheduling based overhead
#for i in /sys/devices/virtual/block/*/queue; do
# echo “0” > $i/add_random;
# echo “0” > $i/discard_max_bytes;
# echo “0” > $i/io_poll;
# echo “0” > $i/iostats;
# echo “0” > $i/nomerges;
com.google.android.gms.unstable read more com.google.android.gms.unstable
# echo “32” > $i/nr_requests;
# echo “0” > $i/rotational;
# echo “1” > $i/rq_affinity;
#done;
for g in /sys/block/*/queue;do
echo “0” > “${g}”/add_random;
echo “0” > “${g}”/iostats;
echo “2” > “${g}”/nomerges;
echo “0” > “${g}”/rotational;
echo “1” > “${g}”/rq_affinity;
com.google.android.gms.unstable here com.google.android.gms.unstable
echo “0” > “${g}”/iosched/slice_idle;
echo “0” > “${g}”/iosched/low_latency;
done;

if [ -d /dev/stune ];then
echo “-12” > /dev/stune/background/schedtune.boost;
STN=$($B cat /dev/stune/top-app/schedtune.boost);
echo “$((STN+1))” > /dev/stune/top-app/schedtune.boost
fi;

com.google.android.gms.unstable click here com.google.android.gms.unstable
# Optimize the Adreno 530 GPU into delivering better overall graphical rendering performance, but do it with “respect” to battery life as well as power consumption as far as possible with less amount of possible tradeoffs; (Commented out because adrenoidler/boost is in the kernel already)
echo “0” > /sys/class/kgsl/kgsl-3d0/bus_split
echo “72” > /sys/class/kgsl/kgsl-3d0/deep_nap_timer
echo “1” > /sys/class/kgsl/kgsl-3d0/force_bus_on
echo “1” > /sys/class/kgsl/kgsl-3d0/force_clk_on
echo “1” > /sys/class/kgsl/kgsl-3d0/force_rail_on
#echo “Y” > /sys/module/adreno_idler/parameters/adreno_idler_active
echo “7500” > /sys/module/adreno_idler/parameters/adreno_idler_idleworkload
#echo “40” > /sys/module/adreno_idler/parameters/adreno_idler_downdifferential
#echo “24” > /sys/module/adreno_idler/parameters/adreno_idler_idlewait
com.google.android.gms.unstable read more com.google.android.gms.unstable

# Disable GPU frequency based throttling;
echo “0” > /sys/class/kgsl/kgsl-3d0/throttling

#1028 readahead KB for sde and sdf io scheds
echo “1028” > /sys/block/sde/queue/read_ahead_kb
echo “1028” > /sys/block/sdf/queue/read_ahead_kb

# Decrease both battery as well as power consumption that is being caused by the screen by lowering how much light the pixels, the built-in LED switches and the LCD backlight module is releasing & “kicking out” by carefully tuning / adjusting their maximum values a little bit to the balanced overall range of their respective spectrums;
echo “175” > /sys/class/leds/blue/max_brightness
com.google.android.gms.unstable check here com.google.android.gms.unstable
echo “175” > /sys/class/leds/green/max_brightness
echo “175” > /sys/class/leds/lcd-backlight/max_brightness
echo “175” > /sys/class/leds/led:switch/max_brightness
echo “175” > /sys/class/leds/red/max_brightness

PASTE  Www.surveysavvy.com Login

if [ -e “/sys/module/xhci_hcd/parameters/wl_divide” ]; then
echo “N” > /sys/module/xhci_hcd/parameters/wl_divide
fi
# Enable a tuned Boeffla wakelock blocker at boot for both better active & idle battery life;
#echo “enable_wlan_ws;enable_wlan_wow_wl_ws;enable_wlan_extscan_wl_ws;enable_timerfd_ws;enable_qcom_rx_wakelock_ws;enable_netmgr_wl_ws;enable_netlink_ws;enable_ipa_ws;tftp_server_wakelock;” > /sys/class/misc/boeffla_wakelock_blocker/wakelock_blocker
com.google.android.gms.unstable click here com.google.android.gms.unstable
echo “wlan_pno_wl;wlan_ipa;wcnss_filter_lock;[timerfd];hal_bluetooth_lock;IPA_WS;sensor_ind;wlan;netmgr_wl;qcom_rx_wakelock;SensorService_wakelock;tftp_server_wakelock;wlan_wow_wl;wlan_extscan_wl;” > /sys/class/misc/boeffla_wakelock_blocker/wakelock_blocker

# Tweak and decrease tx_queue_len default stock value(s) for less amount of generated bufferbloat and for gaining slightly faster network speed and performance;
for i in $(find /sys/class/net -type l); do
echo “128” > $i/tx_queue_len;
done;
echo “2” > /sys/module/tcp_cubic/parameters/hystart_detect;

#data connections and network buffer optimizations
setprop net.tcp.buffersize.hsdpa 4096,32768,65536,4096,32768,65536;
com.google.android.gms.unstable get more info com.google.android.gms.unstable
setprop net.tcp.buffersize.hspa 4096,32768,65536,4096,32768,65536;
setprop net.tcp.buffersize.hspap 4096,32768,65536,4096,32768,65536;
setprop net.tcp.buffersize.hsupa 4096,32768,65536,4096,32768,65536;
setprop net.tcp.buffersize.umts 4095,87380,110208,4096,32768,110208;
setprop net.tcp.buffersize.default 4094,87380,1220608,4096,32768,1220608;
setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040;
setprop net.tcp.buffersize.evdo 4093,26280,35040,4096,16384,35040;
setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680;
setprop net.tcp.buffersize.wifi 4094,87380,1220608,4096,32768,1220608;

com.google.android.gms.unstable get more info com.google.android.gms.unstable
# Tweak the kernel task scheduler for improved overall system performance and user interface responsivness during all kind of possible workload based scenarios;
echo “NO_GENTLE_FAIR_SLEEPERS” > /sys/kernel/debug/sched_features
echo “NO_HRTICK” > /sys/kernel/debug/sched_features
echo “NO_DOUBLE_TICK” > /sys/kernel/debug/sched_features
echo “NO_RT_RUNTIME_SHARE” > /sys/kernel/debug/sched_features
echo “NEXT_BUDDY” > /sys/kernel/debug/sched_features
echo “NO_TTWU_QUEUE” > /sys/kernel/debug/sched_features
echo “UTIL_EST” > /sys/kernel/debug/sched_features
echo “ARCH_CAPACITY” > /sys/kernel/debug/sched_features
echo “ARCH_POWER” > /sys/kernel/debug/sched_features
com.google.android.gms.unstable click here com.google.android.gms.unstable
echo “ENERGY_AWARE” > /sys/kernel/debug/sched_features

# Enable Fast Charge for slightly faster battery charging when being connected to a USB 3.1 port
echo “1” > /sys/kernel/fast_charge/force_fast_charge

# Disable in-kernel wake & sleep gestures for battery saving reasons;
echo “0” > /sys/android_touch/doubletap2wake
echo “0” > /sys/android_touch/sweep2sleep
echo “0” > /sys/android_touch/sweep2wake

com.google.android.gms.unstable check here com.google.android.gms.unstable
# A miscellaneous pm_async tweak that increases the amount of time (in milliseconds) before user processes & kernel threads are being frozen & “put to sleep”;
echo “25000” > /sys/power/pm_freeze_timeout

#Enable audio high performance mode by default
echo “1” > /sys/module/snd_soc_wcd9330/parameters/high_perf_mode

#clean shit
rm -Rf /cache/*.apk;
rm -f /data/*.log;
rm -f /data/*.txt;
com.google.android.gms.unstable check here com.google.android.gms.unstable
rm -f /data/anr/*;
rm -f /data/backup/pending/*.tmp;
rm -f /data/cache/*.*;
rm -f /data/data/*.log;
rm -f /data/data/*.txt;
rm -f /data/log/*.log;
rm -f /data/log/*.txt;
rm -f /data/local/*.apk;
rm -f /data/local/*.log;
rm -f /data/local/*.txt;
com.google.android.gms.unstable more info com.google.android.gms.unstable
rm -f /data/local/tmp/*;
rm -f /data/last_alog/*.log;
rm -f /data/last_alog/*.txt;
rm -f /data/last_kmsg/*.log;
rm -f /data/last_kmsg/*.txt;
rm -f /data/mlog/*;
rm -f /data/system/*.log;
rm -f /data/system/*.txt;
rm -f /data/system/dropbox/*;
rm -Rf /data/system/usagestats/*;
com.google.android.gms.unstable click here com.google.android.gms.unstable
rm -f /data/system/shared_prefs/*;
rm -f /data/tombstones/*;
rm -Rf /sdcard/LOST.DIR;
rm -Rf /sdcard/found000;
rm -Rf /sdcard/LazyList;
rm -Rf /sdcard/albumthumbs;
rm -Rf /sdcard/kunlun;
rm -Rf /sdcard/.CacheOfEUI;
rm -Rf /sdcard/.bstats;
rm -Rf /sdcard/.taobao;
com.google.android.gms.unstable click here com.google.android.gms.unstable
rm -Rf /sdcard/Backucup;
rm -Rf /sdcard/MIUI/debug_log;
rm -Rf /sdcard/wlan_logs;
rm -Rf /sdcard/ramdump;
rm -Rf /sdcard/UnityAdsVideoCache;
rm -f /sdcard/*.log;
rm -f /sdcard/*.CHK;

sleep 5;

com.google.android.gms.unstable more info com.google.android.gms.unstable
fstrim -v /data;
fstrim -v /system;
fstrim -v /cache;
fstrim -v /vendor;
fstrim -v /product;

sleep 7;

# Push a semi-needed log to the internal storage with a “report” if the script could be executed or not;
# Script log file location
com.google.android.gms.unstable click here com.google.android.gms.unstable
LOG_FILE=/storage/emulated/0/logs
echo $(date) > /storage/emulated/0/logs/script.log
if [ $? -eq 0 ]
then
echo “Script executed. Enjoy!” >> /storage/emulated/0/logs/script.log
exit 0
else
echo “Script failed!” >> /storage/emulated/0/logs/script.log
exit 1
fi
com.google.android.gms.unstable get more info com.google.android.gms.unstable

# Done!
com.google.android.gms.unstable

Tags: com.google.android.gms.unstable, www bcfakes com
cheats
game cheats scripts
utube
Buy Hacks Cheats Undetected 2022