Picminer

picminer
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.10.31-ltsi-00003-gcf03eb9 ([email protected]) (gcc version 4.7.3 20121106 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.11-20121123 – Linaro GCC 2012.11) ) #81 SMP Mon Apr 25 11:20:36 CST 2016
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Altera SOCFPGA, model: Altera SOCFPGA Cyclone V
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 258048
free_area_init_node: node 0, pgdat 806e5cc0, node_mem_map 8072a000
Normal zone: 2016 pages used for memmap
Normal zone: 0 pages reserved
picminer informational picminer
Normal zone: 258048 pages, LIFO batch:31
PERCPU: Embedded 8 pages/cpu @80f17000 s11200 r8192 d13376 u32768
pcpu-alloc: s11200 r8192 d13376 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256032
Kernel command line: mem=1008M console=ttyS0,115200 root=/dev/mtdblock3 rw rootfstype=jffs2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1008MB = 1008MB total
picminer picminer
Memory: 1015844k/1015844k available, 16348k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 – 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
vmalloc : 0xbf800000 – 0xff000000 (1016 MB)
lowmem : 0x80000000 – 0xbf000000 (1008 MB)
modules : 0x7f000000 – 0x80000000 ( 16 MB)
.text : 0x80008000 – 0x8065a930 (6475 kB)
.init : 0x8065b000 – 0x806adbc0 ( 331 kB)
.data : 0x806ae000 – 0x806e9990 ( 239 kB)
picminer informational picminer
.bss : 0x806e9990 – 0x80729384 ( 255 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
Console: colour dummy device 80×30
Calibrating delay loop… 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
picminer best of picminer
ftrace: allocating 17687 entries in 52 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x804ab220 – 0x804ab278
CPU1: failed to come online
Brought up 1 CPUs
SMP: Total of 1 processors activated (1196.85 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
NET: Registered protocol family 16
fpga bridge driver
picminer check more picminer
DMA: preallocated 256 KiB pool for atomic coherent allocations
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x410030c9, AUX_CTRL 0x32460000, Cache size: 524288 B
syscon fffef000.l2-cache: regmap [mem 0xfffef000-0xfffeffff] registered
syscon ffd05000.rstmgr: regmap [mem 0xffd05000-0xffd05fff] registered
syscon ffc25000.sdrctl: regmap [mem 0xffc25000-0xffc25fff] registered
syscon ff800000.l3regs: regmap [mem 0xff800000-0xff800fff] registered
syscon ffd08000.sysmgr: regmap [mem 0xffd08000-0xffd0bfff] registered
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
picminer best of picminer
altera_hps2fpga_bridge fpgabridge.2: fpga bridge [hps2fpga] registered as device hps2fpga
altera_hps2fpga_bridge fpgabridge.2: init-val not specified
altera_hps2fpga_bridge fpgabridge.3: fpga bridge [lshps2fpga] registered as device lwhps2fpga
altera_hps2fpga_bridge fpgabridge.3: init-val not specified
altera_hps2fpga_bridge fpgabridge.4: fpga bridge [fpga2hps] registered as device fpga2hps
altera_hps2fpga_bridge fpgabridge.4: init-val not specified
bio: create slab at 0
FPGA Mangager framework driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
picminer picminer
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Switching to clocksource timer0
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
picminer check more picminer
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
arm-pmu arm-pmu: PMU:CTI successfully enabled for 1 cores
picminer informational picminer
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1984
io scheduler noop registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194) is a 16550A
console [ttyS0] enabled
picminer picminer
altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0
brd: module loaded
denali-nand-dt ff900000.nand: Dump timing register values:acc_clks: 4, re_2_we: 20, re_2_re: 20
we_2_re: 12, addr_2_data: 14, rdwr_en_lo_cnt: 2
rdwr_en_hi_cnt: 2, cs_setup_cnt: 2
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
picminer informational picminer
5 ofpart partitions found on MTD device denali-nand
Creating 5 MTD partitions on “denali-nand”:
0x000000000000-0x000001000000 : “NAND Flash Boot Area 16MB”
0x000001000000-0x000002000000 : “NAND Flash Boot Area backup1 16MB”
0x000002000000-0x000003000000 : “NAND Flash Boot Area backup2 16MB”
0x000003000000-0x00000b000000 : “NAND Flash jffs2 Root Filesystem 128MB”
0x00000b000000-0x000010000000 : “NAND Flash jffs2 Root Filesystem 80MB”
dw_spi_mmio fff00000.spi: master is unqueued, this is deprecated
CAN device driver interface
c_can_platform ffc00000.d_can: invalid resource
picminer picminer
c_can_platform ffc00000.d_can: control memory is not used for raminit
c_can_platform ffc00000.d_can: c_can_platform device registered (regs=bf8dc000, irq=163)
stmmac_hw_init: 1000M
stmmac – user ID: 0x10, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
picminer best of picminer
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
eth0: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Synopsys Designware Multimedia Card Interface Driver
dwmmc_socfpga ff704000.dwmmc0: couldn’t determine pwr-en, assuming pwr-en = 0
dwmmc_socfpga ff704000.dwmmc0: Using internal DMA controller.
dwmmc_socfpga ff704000.dwmmc0: Version ID is 240a
picminer check more picminer
dwmmc_socfpga ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
dwmmc_socfpga ff704000.dwmmc0: 1 slots initialized
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using arm/armv7-ca9
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
picminer check more picminer
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
picminer check more picminer
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
VFS: Mounted root (jffs2 filesystem) on device 31:3.
picminer best of picminer
devtmpfs: mounted
Freeing unused kernel memory: 328K (8065b000 – 806ad000)
eth0: device MAC address 92:8c:fa:b3:e0:96
init phy ok
PHY DMA init OK
eth0: device MAC address 00:85:a2:bd:1b:53
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
libphy: stmmac-0:00 – Link is Up – 100/Full
picminer best of picminer
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
Original value in RESET_MANAGER_BASE_ADDR + BRGMODRST_ADDR is 0x0
request_mem_region OK!
AXI fpga dev virtual address is 0xbf942000
*base_vir_addr = 0xc50f
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xc0000000
eth0: device MAC address 00:85:a2:bd:1b:53
picminer picminer
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: device MAC address 00:85:a2:bd:1b:53
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
libphy: stmmac-0:00 – Link is Up – 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
This is C5 board.
picminer informational picminer
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[0] PIC fw version=0x03
Check chain[1] PIC fw version=0x03
Check chain[2] PIC fw version=0x03
Fix freq=600 Chain[0] voltage_pic=23 value=930
Fix freq=600 Chain[1] voltage_pic=23 value=930
picminer check more picminer
Fix freq=600 Chain[2] voltage_pic=23 value=930
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J1] has 0 asic
set_reset_hashboard = 0x00000001
set_reset_hashboard = 0x00000000
retry Chain[J1] has 28 asic
set_reset_hashboard = 0x00000001
set_reset_hashboard = 0x00000000
retry Chain[J1] has 0 asic
picminer informational picminer
set_reset_hashboard = 0x00000001
set_reset_hashboard = 0x00000000
retry Chain[J1] has 28 asic
set_reset_hashboard = 0x00000001
set_reset_hashboard = 0x00000000
retry Chain[J1] has 0 asic
set_reset_hashboard = 0x00000001
set_reset_hashboard = 0x00000000
retry Chain[J1] has 28 asic
set_reset_hashboard = 0x00000001
picminer best of picminer
set_reset_hashboard = 0x00000000
retry Chain[J1] has 28 asic
Chain[J2] has 63 asic
Chain[J3] has 63 asic
Chain[J1] has no freq in PIC, set default freq=600M
Chain[J1] has no core num in PIC
Chain[J2] has no freq in PIC, set default freq=600M
Chain[J2] has no core num in PIC
Chain[J3] has no freq in PIC, set default freq=600M
Chain[J3] has no core num in PIC
picminer check more picminer

Miner fix freq …
read PIC voltage=940 on chain[0]
Chain:0 chipnum=28
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600
Chain:0 max freq=600
picminer best of picminer
Chain:0 min freq=600

read PIC voltage=940 on chain[1]
Chain:1 chipnum=63
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
picminer best of picminer
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:1 max freq=600
Chain:1 min freq=600

read PIC voltage=940 on chain[2]
Chain:2 chipnum=63
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
picminer check more picminer
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:2 max freq=600
Chain:2 min freq=600

picminer check more picminer
max freq = 600
set baud=1
Chain[J2] PIC temp offset=62,-87,0,85,22,0,0,0
Chain[J2] chip[244] use PIC middle temp offset=-87 typeID=1a
New offset Chain[1] chip[244] local:21 remote:-89 offset:-117
Chain[J2] chip[244] get middle temp offset=-117 typeID=1a
Chain[J2] chip[84] use PIC middle temp offset=0 typeID=1f
Warning: Chain[J2] has no temp offset in PIC! will fix it
New offset Chain[1] chip[244] local:21 remote:-89 offset:-117
Chain[J2] chip[244] get middle temp offset=-117 typeID=1a
picminer check more picminer
Chain[J3] PIC temp offset=62,-81,0,0,0,0,0,0
Chain[J3] chip[244] use PIC middle temp offset=-81 typeID=1a
New offset Chain[2] chip[244] local:20 remote:-90 offset:-117
Chain[J3] chip[244] get middle temp offset=-117 typeID=1a
Chain[J1] set working voltage=930 [23]
Chain[J2] set working voltage=930 [23]
Chain[J3] set working voltage=930 [23]
setStartTimePoint total_tv_start_sys=97 total_tv_end_sys=98
restartNum = 2 , auto-reinit enabled…
Fatal Error: network connection lost!
picminer informational picminer
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
picminer informational picminer
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once…
do check_asic_reg 0x08

get RT hashrate from Chain[0]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
picminer picminer
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000
get RT hashrate from Chain[1]: (asic index start from 1-63)
Asic[01]=73.0140 Asic[02]=68.5510 Asic[03]=70.5810 Asic[04]=67.2430 Asic[05]=65.8170 Asic[06]=69.3730 Asic[07]=67.5450 Asic[08]=64.1560
Asic[09]=70.7150 Asic[10]=71.3700 Asic[11]=70.2620 Asic[12]=68.8360 Asic[13]=66.9570 Asic[14]=71.3190 Asic[15]=66.7560 Asic[16]=74.9100
Asic[17]=62.0250 Asic[18]=61.3540 Asic[19]=66.8900 Asic[20]=69.9940 Asic[21]=64.2060 Asic[22]=66.8730 Asic[23]=67.3770 Asic[24]=69.0380
Asic[25]=68.7690 Asic[26]=65.7490 Asic[27]=66.5040 Asic[28]=69.7760 Asic[29]=74.0710 Asic[30]=69.3400 Asic[31]=63.5850 Asic[32]=67.4770
Asic[33]=71.3870 Asic[34]=62.1930 Asic[35]=66.0180 Asic[36]=66.0180 Asic[37]=67.1080 Asic[38]=68.6350 Asic[39]=67.9140 Asic[40]=72.6280
Asic[41]=63.2830 Asic[42]=66.1520 Asic[43]=68.8700 Asic[44]=69.5410 Asic[45]=67.8800 Asic[46]=67.9810 Asic[47]=66.3030 Asic[48]=67.7290
Asic[49]=62.6790 Asic[50]=69.0880 Asic[51]=65.7330 Asic[52]=64.5250 Asic[53]=70.7320 Asic[54]=69.5240 Asic[55]=69.9270 Asic[56]=69.4240
picminer best of picminer
Asic[57]=68.0310 Asic[58]=68.7190 Asic[59]=68.9540 Asic[60]=66.0350 Asic[61]=67.5110 Asic[62]=71.9570 Asic[63]=68.9870

get RT hashrate from Chain[2]: (asic index start from 1-63)
Asic[01]=69.9440 Asic[02]=68.2490 Asic[03]=69.8600 Asic[04]=68.3830 Asic[05]=67.6280 Asic[06]=69.2060 Asic[07]=66.7730 Asic[08]=69.9270
Asic[09]=66.4200 Asic[10]=68.6690 Asic[11]=63.9540 Asic[12]=70.6150 Asic[13]=71.7560 Asic[14]=63.7190 Asic[15]=69.6080 Asic[16]=66.7060
Asic[17]=67.7790 Asic[18]=68.7360 Asic[19]=69.4740 Asic[20]=71.1680 Asic[21]=68.1320 Asic[22]=71.7720 Asic[23]=66.3530 Asic[24]=70.7320
Asic[25]=66.9410 Asic[26]=66.2700 Asic[27]=62.9140 Asic[28]=66.6220 Asic[29]=68.7860 Asic[30]=73.4000 Asic[31]=65.5650 Asic[32]=70.1280
Asic[33]=69.4740 Asic[34]=69.2730 Asic[35]=65.3130 Asic[36]=67.2090 Asic[37]=68.1150 Asic[38]=66.7560 Asic[39]=70.2460 Asic[40]=67.1420
Asic[41]=62.1260 Asic[42]=64.8430 Asic[43]=70.5810 Asic[44]=69.0040 Asic[45]=71.1180 Asic[46]=67.6790 Asic[47]=65.6490 Asic[48]=67.3940
Asic[49]=69.6750 Asic[50]=68.4510 Asic[51]=68.2160 Asic[52]=73.4330 Asic[53]=63.2160 Asic[54]=69.0210 Asic[55]=61.8240 Asic[56]=67.6790
picminer informational picminer
Asic[57]=70.3460 Asic[58]=71.1180 Asic[59]=66.9910 Asic[60]=61.4710 Asic[61]=67.7290 Asic[62]=62.5110 Asic[63]=67.8800
Check Chain[J1] ASIC RT error: (asic index start from 1-63)
Asic[29]=36028797.002000
Asic[30]=36028797.002000
Asic[31]=36028797.002000
Asic[32]=33989202.882000
Asic[33]=246565.000000
Asic[34]=36028797.002000
Asic[35]=71467.200000
Asic[36]=36028797.002000
picminer best of picminer
Asic[37]=36028797.002000
Asic[38]=35739354.810000
Asic[39]=31796776.746000
Asic[40]=36028797.002000
Asic[41]=36028797.002000
Asic[42]=36028797.002000
Asic[43]=36028797.002000
Asic[44]=246565.000000
Asic[45]=36028797.002000
Asic[46]=36028797.002000
picminer best of picminer
Asic[47]=36028797.002000
Asic[48]=17598236.562000
Asic[49]=36028797.002000
Asic[50]=36028797.002000
Asic[51]=36028797.002000
Asic[52]=264798.000000
Asic[53]=36028797.002000
Asic[54]=36028797.002000
Asic[55]=36028797.002000
Asic[56]=36028797.002000
picminer picminer
Asic[57]=278172.000000
Asic[58]=36028797.002000
Asic[59]=36028797.002000
Asic[60]=36028797.002000
Asic[61]=36028797.002000
Asic[62]=36028797.002000
Asic[63]=36028797.002000
Check Chain[J2] ASIC RT error: (asic index start from 1-63)
Check Chain[J3] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
picminer picminer
do read temp on Chain[0]
Done read temp on Chain[0]
do read temp on Chain[1]
Chain[1] Chip[62] TempTypeID=1a middle offset=-117
Chain[1] Chip[62] local Temp=53
Chain[1] Chip[62] middle Temp=16
218 fix Chain[1] Chip[62] middle Temp = 83
Done read temp on Chain[1]
do read temp on Chain[2]
Chain[2] Chip[62] TempTypeID=1a middle offset=-117
picminer check more picminer
Chain[2] Chip[62] local Temp=53
Chain[2] Chip[62] middle Temp=13
218 fix Chain[2] Chip[62] middle Temp = 83
Done read temp on Chain[2]
set FAN speed according to: temp_highest=53 temp_top1[PWM_T]=83 temp_top1[TEMP_POS_LOCAL]=53 temp_change=1 fix_fan_steps=0
FAN PWM: 54
read_temp_func Done!
CRC error counter=47874
picminer

Envy 4512 Driver

Com.samsung.android.rubin.app