Ustvnow Login Credentials

ustvnow login credentials
************************************************************************************************************************************************************************************************************

$ streamlink [OPTIONS] [STREAM]

File output options:

-o FILENAME –output FILENAME Write stream data to FILENAME instead of playing it. You will be prompted if the file already exists.
-f –force When using -o or -r, always write to file even if it already exists.
-O –stdout Write stream data to stdout instead of playing it.
-r FILENAME –record FILENAME Open the stream in the player, while at the same time writing it to FILENAME. You will be prompted if the file already exists.
ustvnow login credentials informational ustvnow login credentials
-R FILENAME –record-and-pipe FILENAME Write stream data to stdout, while at the same time writing it to FILENAME. You will be prompted if the file already exists.

************************************************************************************************************************************************************************************************************

Favorite Commands:

streamlink https://www.twitch.tv/lilypichu best -o out.mp4

ustvnow login credentials best of ustvnow login credentials

************************************************************************************************************************************************************************************************************

Favorite options:

–hls-live-restart Skip to the beginning of a live stream, or as far back as possible.

************************************************************************************************************************************************************************************************************
ustvnow login credentials check more ustvnow login credentials

##### Simple List #####

Stream options:

–url URL = url Literally a Url. Can usually exclude Http(s)
–default-stream STREAM = “720p,480p,best,worst” Simple quality selector. Fallback using comma-seperated list.
–retry-streams DELAY = numerical # delay between stream fetch attemps UNSET = 1 SECOND)
ustvnow login credentials best of ustvnow login credentials
–retry-max COUNT = numerical # of stream fetch retry attemps UNSET/0 = INFINITE)
–retry-open ATTEMPTS = numerical # of attemps to open stream after sucessful stream fetch Default is: 1.
–stream-types TYPES = “rtmp,hls,hds,http,akamaihd,*” * = wildcard A comma-delimited list of stream types to allow.
–stream-priority TYPES = “rtmp,hls,hds,http,akamaihd,*” * = wildcard A comma-delimited list of stream types to allow.
–stream-sorting-excludes STREAMS = [operator] >, >=, <, Ignored file lengths Default is: None
–hls-segment-key-uri URI URI to segment encryption key. If no URI is specified, the URI contained in the segments will be used Default is: None
–hls-audio-select CODE Selects a audio source(s) (language/name) When multiple sources available. Ex: “English,German” “en,de” “*”
–hls-timeout TIMEOUT Timeout for reading data from HLS streams REQUIRED: –hls-timeout TIMEOUT > –hls-segment-ignore-names Default is: 60
–hls-start-offset [HH:]MM:SS Time Offset. **NOTE** For live streams, this is a negative offset from the end of the stream (rewind). Default is: 00:00:00
–hls-duration [HH:]MM:SS Limit the playback duration, useful for watching segments of a stream. Default is: unlimited.
–hls-live-restart Skip to the beginning of a live stream, or as far back as possible.

–http-stream-timeout TIMEOUT Timeout for reading data from HTTP streams. Default is: 60.0

ustvnow login credentials check more ustvnow login credentials
–rtmp-proxy PROXY, A SOCKS proxy that RTMP streams will use. Example: 127.0.0.1:9050
–rtmpdump-proxy PROXY A SOCKS proxy that RTMP streams will use. Example: 127.0.0.1:9050
–rtmp-rtmpdump FILENAME, RTMPDump is used to access RTMP streams. Can specify location of rtmpdump exe if not in your PATH. Example: “/usr/local/bin/rtmpdump”
–rtmpdump FILENAME RTMPDump is used to access RTMP streams. Can specify location of rtmpdump exe if not in your PATH. Example: “/usr/local/bin/rtmpdump”
–rtmp-timeout TIMEOUT Timeout for reading data from RTMP streams. Default is: 60

–stream-segment-attempts ATTEMPTS How many attempts should be done to download each segment before giving up. Default is: 3
–stream-segment-threads THREADS The size of the thread pool used to download segments. Minimum value is 1 and maximum is 10. Default is: 1.
–stream-segment-timeout TIMEOUT Segment connect and read timeout. Default is: 10.0.
–stream-timeout TIMEOUT Timeout for reading data from streams.Default is: 60.0.
ustvnow login credentials informational ustvnow login credentials
–stream-url If possible, translate the stream to a URL and print it.
–subprocess-cmdline, –cmdline, -c Print the command-line used internally to play the stream. This is only available on RTMP streams.
–subprocess-errorlog, –errorlog, -e Log possible errors from internal subprocesses to a temporary file. Saved in systems temporary directory. Useful when debugging rtmpdump related issues.
–subprocess-errorlog-path PATH, Log subprocess errorlog to a specific file rather than a temporary file. Takes precedence over subprocess-errorlog. Useful when debugging rtmpdump related issues.
–errorlog-path PATH Log subprocess errorlog to a specific file rather than a temporary file. Takes precedence over subprocess-errorlog. Useful when debugging rtmpdump related issues.
–ffmpeg-ffmpeg FILENAME FFMPEG is used to access or mux separate video and audio streams. Specify location of the ffmpeg executable if not in PATH. Example: “/usr/local/bin/ffmpeg”
–ffmpeg-verbose Write the console output from ffmpeg to the console.
–ffmpeg-verbose-path PATH Path to write the output from the ffmpeg console.
–ffmpeg-video-transcode CODEC When muxing streams transcode the video to this CODEC. Default is: “copy”. Example: “h264”
–ffmpeg-audio-transcode CODEC When muxing streams transcode the audio to this CODEC. Default is: “copy”. Example: “aac”
ustvnow login credentials ustvnow login credentials

–ringbuffer-size SIZE
The maximum size of ringbuffer. Add a M or K suffix to specify mega or kilo bytes instead of bytes.
The ringbuffer is used as a temporary storage between the stream and the player. This is to allows us to download the stream faster than the player wants to read it.
The smaller the size, the higher chance of the player buffering if there are download speed dips and the higher size the more data we can use as a storage to catch up from speed dips.
It also allows you to temporary pause as long as the ringbuffer doesn’t get full since we continue to download the stream in the background. Default is: “16M”.
Note: A smaller size is recommended on lower end systems (such as Raspberry Pi) when playing stream types that require some extra processing (such as HDS) to avoid unnecessary background processing.

************************************************************************************************************************************************************************************************************
ustvnow login credentials check more ustvnow login credentials

##### Detailed List #####

Stream options

–url URL

A URL to attempt to extract streams from.
ustvnow login credentials check more ustvnow login credentials
Usually, the protocol of http(s) URLs can be omitted (https://), depending on the implementation of the plugin being used.
This is an alternative to setting the URL using a positional argument and can be useful if set in a config file.

–default-stream STREAM

Stream to play.
Use best or worst for selecting the highest or lowest available quality.
Fallback streams can be specified by using a comma-separated list:
“720p,480p,best”
This is an alternative to setting the stream using a positional argument and can be useful if set in a config file.
ustvnow login credentials ustvnow login credentials

–retry-streams DELAY

Retry fetching the list of available streams until streams are found while waiting DELAY second(s) between each attempt. If unset, only one attempt will be made to fetch the list of streams available.
The number of fetch retry attempts can be capped with –retry-max.

–retry-max COUNT

When using –retry-streams, stop retrying the fetch after COUNT retry attempt(s). Fetch will retry infinitely if COUNT is zero or unset.
If –retry-max is set without setting –retry-streams, the delay between retries will default to 1 second.
ustvnow login credentials best of ustvnow login credentials

–retry-open ATTEMPTS

After a successful fetch, try ATTEMPTS time(s) to open the stream until giving up.
Default is: 1.

–stream-types TYPES, –stream-priority TYPES

A comma-delimited list of stream types to allow.
The order will be used to separate streams when there are multiple streams with the same name but different stream types. Any stream type not listed will be omitted from the available streams list.
ustvnow login credentials ustvnow login credentials
A * can be used as a wildcard to match any other type of stream, eg. muxed-stream.
Default is: “rtmp,hls,hds,http,akamaihd,*”.

–stream-sorting-excludes STREAMS

Fine tune the best and worst stream name synonyms by excluding unwanted streams.
If all of the available streams get excluded, best and worst will become inaccessible and new special stream synonyms best-unfiltered and worst-unfiltered can be used as a fallback selection method.
Uses a filter expression in the format:
[operator]
Valid operators are >, >=, < and 480p”
Multiple filters can be used by separating each expression with a comma.
For example this will exclude streams from two quality types:
“>480p,>medium”

Stream transport options

ustvnow login credentials informational ustvnow login credentials
–hds-live-edge SECONDS

The time live HDS streams will start from the edge of stream.
Default is: 10.0.

–hds-segment-attempts ATTEMPTS

How many attempts should be done to download each HDS segment before giving up.
Default is: 3.

ustvnow login credentials check more ustvnow login credentials
–hds-segment-threads THREADS

The size of the thread pool used to download HDS segments. Minimum value is 1 and maximum is 10.
Default is: 1.

–hds-segment-timeout TIMEOUT

HDS segment connect and read timeout.
Default is: 10.0.

ustvnow login credentials best of ustvnow login credentials
–hds-timeout TIMEOUT

Timeout for reading data from HDS streams.
Default is: 60.0.

–hls-live-edge SEGMENTS

How many segments from the end to start live HLS streams on.
The lower the value the lower latency from the source you will be, but also increases the chance of buffering.

ustvnow login credentials informational ustvnow login credentials
Default is: 3.

–hls-segment-attempts ATTEMPTS

How many attempts should be done to download each HLS segment before giving up.
Default is: 3.

–hls-playlist-reload-attempts ATTEMPTS

How many attempts should be done to reload the HLS playlist before giving up.
ustvnow login credentials best of ustvnow login credentials
Default is: 3.

–hls-segment-threads THREADS

The size of the thread pool used to download HLS segments. Minimum value is 1 and maximum is 10.
Default is: 1.

–hls-segment-timeout TIMEOUT

HLS segment connect and read timeout.
ustvnow login credentials informational ustvnow login credentials
Default is: 10.0.

–hls-segment-ignore-names NAMES

A comma-delimited list of segment names that will not be fetched.
Example: –hls-segment-ignore-names 000,001,002
This will ignore every segment that ends with 000.ts, 001.ts and 002.ts
Default is: None.
Note
The –hls-timeout must be increased, to a time that is longer than the ignored break.
ustvnow login credentials informational ustvnow login credentials

–hls-segment-key-uri URI

URI to segment encryption key. If no URI is specified, the URI contained in the segments will be used.
Example: –hls-segment-key-uri “https://example.com/hls/encryption_key”
Default is: None.

–hls-audio-select CODE

Selects a specific audio source or sources, by language code or name, when multiple audio sources are available. Can be * to download all audio sources.
ustvnow login credentials ustvnow login credentials
Examples:
–hls-audio-select “English,German”
–hls-audio-select “en,de”
–hls-audio-select “*”
Note
This is only useful in special circumstances where the regular locale option fails, such as when multiple sources of the same language exists.

–hls-timeout TIMEOUT

Timeout for reading data from HLS streams.
ustvnow login credentials ustvnow login credentials
Default is: 60.0.

–hls-start-offset [HH:]MM:SS

Amount of time to skip from the beginning of the stream. For live streams, this is a negative offset from the end of the stream (rewind).
Default is: 00:00:00.

–hls-duration [HH:]MM:SS

Limit the playback duration, useful for watching segments of a stream. The actual duration may be slightly longer, as it is rounded to the nearest HLS segment.
ustvnow login credentials check more ustvnow login credentials
Default is: unlimited.

–hls-live-restart

Skip to the beginning of a live stream, or as far back as possible.

–http-stream-timeout TIMEOUT

Timeout for reading data from HTTP streams.
Default is: 60.0.
ustvnow login credentials check more ustvnow login credentials

–ringbuffer-size SIZE

The maximum size of ringbuffer. Add a M or K suffix to specify mega or kilo bytes instead of bytes.
The ringbuffer is used as a temporary storage between the stream and the player. This is to allows us to download the stream faster than the player wants to read it.
The smaller the size, the higher chance of the player buffering if there are download speed dips and the higher size the more data we can use as a storage to catch up from speed dips.
It also allows you to temporary pause as long as the ringbuffer doesn’t get full since we continue to download the stream in the background.
Default is: “16M”.
Note
A smaller size is recommended on lower end systems (such as Raspberry Pi) when playing stream types that require some extra processing (such as HDS) to avoid unnecessary background processing.
ustvnow login credentials check more ustvnow login credentials

–rtmp-proxy PROXY, –rtmpdump-proxy PROXY

A SOCKS proxy that RTMP streams will use.
Example: 127.0.0.1:9050

–rtmp-rtmpdump FILENAME, –rtmpdump FILENAME

RTMPDump is used to access RTMP streams. You can specify the location of the rtmpdump executable if it is not in your PATH.
Example: “/usr/local/bin/rtmpdump”
ustvnow login credentials best of ustvnow login credentials

–rtmp-timeout TIMEOUT

Timeout for reading data from RTMP streams.
Default is: 60.0.

–stream-segment-attempts ATTEMPTS

How many attempts should be done to download each segment before giving up.
This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.
ustvnow login credentials check more ustvnow login credentials
Default is: 3.

–stream-segment-threads THREADS

The size of the thread pool used to download segments. Minimum value is 1 and maximum is 10.
This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.
Default is: 1.

–stream-segment-timeout TIMEOUT

ustvnow login credentials best of ustvnow login credentials
Segment connect and read timeout.
This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.
Default is: 10.0.

–stream-timeout TIMEOUT

Timeout for reading data from streams.
This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.
Default is: 60.0.

ustvnow login credentials informational ustvnow login credentials
–stream-url

If possible, translate the stream to a URL and print it.

–subprocess-cmdline, –cmdline, -c

Print the command-line used internally to play the stream.
This is only available on RTMP streams.

–subprocess-errorlog, –errorlog, -e
ustvnow login credentials ustvnow login credentials

Log possible errors from internal subprocesses to a temporary file. The file will be saved in your systems temporary directory.
Useful when debugging rtmpdump related issues.

–subprocess-errorlog-path PATH, –errorlog-path PATH

Log the subprocess errorlog to a specific file rather than a temporary file. Takes precedence over subprocess-errorlog.
Useful when debugging rtmpdump related issues.

–ffmpeg-ffmpeg FILENAME
ustvnow login credentials best of ustvnow login credentials

FFMPEG is used to access or mux separate video and audio streams. You can specify the location of the ffmpeg executable if it is not in your PATH.
Example: “/usr/local/bin/ffmpeg”

–ffmpeg-verbose

Write the console output from ffmpeg to the console.

–ffmpeg-verbose-path PATH

ustvnow login credentials check more ustvnow login credentials
Path to write the output from the ffmpeg console.

–ffmpeg-video-transcode CODEC

When muxing streams transcode the video to this CODEC.
Default is: “copy”.
Example: “h264”

–ffmpeg-audio-transcode CODEC

ustvnow login credentials check more ustvnow login credentials
When muxing streams transcode the audio to this CODEC.
Default is: “copy”.
Example: “aac”

HTTP options

–http-proxy HTTP_PROXY

A HTTP proxy to use for all HTTP requests, including WebSocket connections. By default this proxy will be used for all HTTPS requests too.
Example: “http://hostname:port/”
ustvnow login credentials ustvnow login credentials

–https-proxy HTTPS_PROXY

A HTTPS capable proxy to use for all HTTPS requests.

Example: “https://hostname:port/”

–http-cookie KEY=VALUE

A cookie to add to each HTTP request.
ustvnow login credentials informational ustvnow login credentials

Can be repeated to add multiple cookies.

–http-header KEY=VALUE

A header to add to each HTTP request.

Can be repeated to add multiple headers.

–http-query-param KEY=VALUE
ustvnow login credentials check more ustvnow login credentials

A query parameter to add to each HTTP request.

Can be repeated to add multiple query parameters.

–http-ignore-env

Ignore HTTP settings set in the environment such as environment variables (HTTP_PROXY, etc) or ~/.netrc authentication.

–http-no-ssl-verify
ustvnow login credentials best of ustvnow login credentials

Don’t attempt to verify SSL certificates.

Usually a bad idea, only use this if you know what you’re doing.

–http-disable-dh

Disable Diffie Hellman key exchange

Usually a bad idea, only use this if you know what you’re doing.
ustvnow login credentials ustvnow login credentials

–http-ssl-cert FILENAME

SSL certificate to use.

Expects a .pem file.

–http-ssl-cert-crt-key CRT_FILENAME KEY_FILENAME

SSL certificate to use.
ustvnow login credentials informational ustvnow login credentials

Expects a .crt and a .key file.

–http-timeout TIMEOUT

General timeout used by all HTTP requests except the ones covered by other options.

Default is: 20.0.

Plugin options
ustvnow login credentials informational ustvnow login credentials

–abweb-username USERNAME

The username associated with your ABweb account, required to access any ABweb stream.

–abweb-password PASSWORD

A ABweb account password to use with –abweb-username.

–abweb-purge-credentials
ustvnow login credentials best of ustvnow login credentials

Purge cached ABweb credentials to initiate a new session and reauthenticate.

–afreeca-username USERNAME

The username used to register with afreecatv.com.

–afreeca-password PASSWORD

A afreecatv.com account password to use with –afreeca-username.
ustvnow login credentials ustvnow login credentials

–animelab-email EMAIL

The email address used to register with animelab.com.

–animelab-password PASSWORD

A animelab.com account password to use with –animelab-email.

–bbciplayer-username USERNAME
ustvnow login credentials informational ustvnow login credentials

The username used to register with bbc.co.uk.

–bbciplayer-password PASSWORD

A bbc.co.uk account password to use with –bbciplayer-username.

–bbciplayer-hd

Prefer HD streams over local SD streams, some live programmes may not be broadcast in HD.
ustvnow login credentials best of ustvnow login credentials

–btsports-email EMAIL

The email associated with your BT Sport account, required to access any BT Sport stream.

–btsports-password PASSWORD

Your BT Sport account password.

–btv-username USERNAME
ustvnow login credentials best of ustvnow login credentials

A BTV username required to access any stream.

–btv-password PASSWORD

A BTV account password to use with –btv-username.

–clubbingtv-username

The username used to register with Clubbing TV.
ustvnow login credentials informational ustvnow login credentials

–clubbingtv-password

A Clubbing TV account password to use with –clubbingtv-username.

–crunchyroll-username USERNAME

A Crunchyroll username to allow access to restricted streams.

–crunchyroll-password [PASSWORD]
ustvnow login credentials informational ustvnow login credentials

A Crunchyroll password for use with –crunchyroll-username.

If left blank you will be prompted.

–crunchyroll-purge-credentials

Purge cached Crunchyroll credentials to initiate a new session and reauthenticate.

–crunchyroll-session-id SESSION_ID
ustvnow login credentials check more ustvnow login credentials

Set a specific session ID for crunchyroll, can be used to bypass region restrictions. If using an authenticated session ID, it is recommended that the authentication parameters be omitted
as the session ID is account specific.

Note

The session ID will be overwritten if authentication is used and the session ID does not match the account.

–funimation-email

ustvnow login credentials best of ustvnow login credentials
Email address for your Funimation account.

–funimation-password

Password for your Funimation account.

–funimation-language

The audio language to use for the stream; japanese or english.

ustvnow login credentials check more ustvnow login credentials
Default is: “english”.

–funimation-mux-subtitles

Enable automatically including available subtitles in to the output stream.

–liveedu-email EMAIL

The email address used to register with liveedu.tv.

ustvnow login credentials informational ustvnow login credentials
–liveedu-password PASSWORD

A LiveEdu account password to use with –liveedu-email.

–openrectv-email EMAIL

The email associated with your openrectv account, required to access any openrectv stream.

–openrectv-password PASSWORD

ustvnow login credentials informational ustvnow login credentials
An openrectv account password to use with –openrectv-email.

–pixiv-username USERNAME

The email/username used to register with pixiv.net

–pixiv-password PASSWORD

A pixiv.net account password to use with –pixiv-username

ustvnow login credentials best of ustvnow login credentials
–pixiv-sessionid SESSIONID

The pixiv.net sessionid thats used in pixivs PHPSESSID cookie. can be used instead of the username/password login process.

–pixiv-devicetoken DEVICETOKEN

The pixiv.net device token thats used in pixivs device_token cookie. can be used instead of the username/password login process.

–pixiv-purge-credentials

ustvnow login credentials check more ustvnow login credentials
Purge cached Pixiv credentials to initiate a new session and reauthenticate.

–pixiv-performer USER

Select a co-host stream instead of the owner stream.

–pluzz-mux-subtitles

Automatically mux available subtitles in to the output stream.

ustvnow login credentials ustvnow login credentials
–rtve-mux-subtitles

Automatically mux available subtitles in to the output stream.

–sbscokr-id CHANNELID

Channel ID to play.

Example:

ustvnow login credentials informational ustvnow login credentials
streamlink http://play.sbs.co.kr/onair/pc/index.html best –sbscokr-id S01

–schoolism-email EMAIL

The email associated with your Schoolism account, required to access any Schoolism stream.

–schoolism-password PASSWORD

A Schoolism account password to use with –schoolism-email.

ustvnow login credentials ustvnow login credentials
–schoolism-part PART

Play part number PART of the lesson, or assignment feedback video.

Defaults is 1.

–steam-email EMAIL

A Steam account email address to access friends/private streams

ustvnow login credentials ustvnow login credentials
–steam-password PASSWORD

A Steam account password to use with –steam-email.

–tvplayer-email EMAIL

The email address used to register with tvplayer.com.

–tvplayer-password PASSWORD

ustvnow login credentials check more ustvnow login credentials
The password for your tvplayer.com account.

–twitch-oauth-token TOKEN

An OAuth token to use for Twitch authentication. Use –twitch-oauth-authenticate to create a token.

–twitch-cookie COOKIES

Twitch cookies to authenticate to allow access to subscription channels.

ustvnow login credentials check more ustvnow login credentials
Example:

“_twitch_session_id=xxxxxx; persistent=xxxxx”

Note

This method is the old and clunky way of authenticating with Twitch, using –twitch-oauth-authenticate is the recommended and simpler way of doing it now.

–twitch-disable-hosting

ustvnow login credentials best of ustvnow login credentials
Do not open the stream if the target channel is hosting another channel.

–twitch-disable-ads

Skip embedded advertisement segments at the beginning or during a stream. Will cause these segments to be missing from the stream.

–ustream-password PASSWORD

A password to access password protected UStream.tv channels.

ustvnow login credentials best of ustvnow login credentials
–ustvnow-username USERNAME

Your USTV Now account username

–ustvnow-password PASSWORD

Your USTV Now account password

–vimeo-mux-subtitles

ustvnow login credentials ustvnow login credentials
Automatically mux available subtitles in to the output stream.

–wwenetwork-email EMAIL

The email associated with your WWE Network account, required to access any WWE Network stream.

–wwenetwork-password PASSWORD

A WWE Network account password to use with –wwenetwork-email.

ustvnow login credentials best of ustvnow login credentials
–yupptv-email EMAIL

Your YuppTV account email

–yupptv-password PASSWORD

Your YuppTV account password.

–zattoo-email EMAIL

ustvnow login credentials informational ustvnow login credentials
The email associated with your zattoo account, required to access any zattoo stream.

–zattoo-password PASSWORD

A zattoo account password to use with –zattoo-email.

–zattoo-purge-credentials

Purge cached zattoo credentials to initiate a new session and reauthenticate.

ustvnow login credentials check more ustvnow login credentials
–zattoo-stream-types TYPES

A comma-delimited list of stream types which should be used, the following types are allowed:

dash
hls
hls5

Default is: “hls”.

ustvnow login credentials best of ustvnow login credentials

************************************************************************************************************************************************************************************************************
ustvnow login credentials

Download Ups Worldship 2016

Go Gurt